lightningwiki.net - User contributions [en]

User talk:173.87.33.113

2019-02-15T09:05:29Z

173.87.33.113: Created page with "Hi There, The formatting was very different than I had originally created it, and the lnd linux commands were not easily visible. I changed it back to it's original formatti..."

Hi There,

The formatting was very different than I had originally created it, and the lnd linux commands were not easily visible. I changed it back to it's original formatting and I included the [[Satoshi|Satoshi]] link that you added. Is there anything else to change or include?

Invoice

2019-02-15T09:04:01Z

173.87.33.113: The formatting was very different than I left it, and the commands were not easily visible. I changed it back to it's original version and I included the Satoshi link that you added. Is there anything else to change?

A request for funds on the Lightning Network, possibly including payment type, payment amount, expiry, and other information. This is how payments are made on the Lightning Network, rather than using Bitcoin-style addresses.

If you want to accept payments (on your site), look at [[Payment providers]]

=Payments process=
{{TODO|Explain how a payment is done}}
# Someone creates an invoice
# Invoice is paid
# Payment is done!
=Payment steps using LND command line=
1. The Payee starts the process by creating an invoice
note: The amount to send is always expressed in [[Satoshi|Satoshi]] (1 satoshi = .00000001 bitcoin) so in this example the payee creates an invoice for 50,000 satoshis (or .0005 bitcoin).
$ lncli addinvoice --amt 50000
2. The payee then sends the invoice to the payer, which decodes the invoice to verify the amount (see the 'data in invoice' below)
$ lncli decodepayreq <paste invoice here>
3. The payer then pays the invoice
$ lncli payinvoice <paste invoice here>

* That's it! Also note, the decodepayreq step can normally be skipped since when you pay the invoice you are prompted to confirm the amount before it is sent

= Data in invoice =
<pre>
"destination": "03ab75012c0a552ddb0194f43d57d9af2a83a86cc2a96abf0134c6d9349819c8a8",
"payment_hash": "8d54fb2afe6e35f36f3e6055fa062b2f3fd11e67b0d287618471477fde80f3a2",
"num_satoshis": "0",
"timestamp": "1546608429",
"expiry": "3600",
"description": "Lightning Network Tester",
"description_hash": "",
"fallback_addr": "",
"cltv_expiry": "10",
"route_hints": [
]
</pre>

==Payment preimage==
Proof that payment has been received, held by the final recipient, who is the only person who knows this secret. The final recipient releases the preimage in order to release funds. The payment preimage is hashed as the payment hash in the HTLC.

=Example=
<pre>lnbc1pwr3fk2pp5zh36fav42ngkxfzywag42y06e03drpcujg38mq5gzkftdhp3phhsdqqcqzysvq8mgc5782mje6x0hgqd70pc83aa52g8pmpnc0j9x4pa3hrz3csp0ezl477f06ee4qmt4plcmmsftypy727w9zn06h9h6cz4n02t9qcp0c74yt</pre>
BOLT11 has more

Invoice

2019-02-12T01:37:51Z

173.87.33.113:

A request for funds on the Lightning Network, possibly including payment type, payment amount, expiry, and other information. This is how payments are made on the Lightning Network, rather than using Bitcoin-style addresses.

If you want to accept payments (on your site), look at [[Payment providers]]

=Payments process=
{{TODO|Explain how a payment is done}}
# Someone creates an invoice
# Invoice is paid
# Payment is done!
=Payment steps using LND command line=
1. The Payee starts the process by creating an invoice
note: The amount to send is always expressed in Satoshis (1 satoshi = .00000001 bitcoin) so in this example the payee creates an invoice for 50,000 satoshis (or .0005 bitcoin).
$ lncli addinvoice --amt 50000
2. The payee then sends the invoice to the payer, which decodes the invoice to verify the amount (see the 'data in invoice' below)
$ lncli decodepayreq <paste invoice here>
3. The payer then pays the invoice
$ lncli payinvoice <paste invoice here>

* That's it! Also note, the decodepayreq step can normally be skipped since when you pay the invoice you are prompted to confirm the amount before it is sent

= Data in invoice =
<pre>
"destination": "03ab75012c0a552ddb0194f43d57d9af2a83a86cc2a96abf0134c6d9349819c8a8",
"payment_hash": "8d54fb2afe6e35f36f3e6055fa062b2f3fd11e67b0d287618471477fde80f3a2",
"num_satoshis": "0",
"timestamp": "1546608429",
"expiry": "3600",
"description": "Lightning Network Tester",
"description_hash": "",
"fallback_addr": "",
"cltv_expiry": "10",
"route_hints": [
]
</pre>

==Payment preimage==
Proof that payment has been received, held by the final recipient, who is the only person who knows this secret. The final recipient releases the preimage in order to release funds. The payment preimage is hashed as the payment hash in the HTLC.

=Example=
<pre>lnbc1pwr3fk2pp5zh36fav42ngkxfzywag42y06e03drpcujg38mq5gzkftdhp3phhsdqqcqzysvq8mgc5782mje6x0hgqd70pc83aa52g8pmpnc0j9x4pa3hrz3csp0ezl477f06ee4qmt4plcmmsftypy727w9zn06h9h6cz4n02t9qcp0c74yt</pre>
BOLT11 has more

Invoice

2019-02-12T01:34:27Z

173.87.33.113:

A request for funds on the Lightning Network, possibly including payment type, payment amount, expiry, and other information. This is how payments are made on the Lightning Network, rather than using Bitcoin-style addresses.

If you want to accept payments (on your site), look at [[Payment providers]]

=Payments process=
{{TODO|Explain how a payment is done}}
# Someone creates an invoice
# Invoice is paid
# Payment is done!
=Payment steps using LND command line=
1. The Payee starts the process by creating an invoice note: The amount to send is always expressed in Satoshis (1 satoshi = .00000001 bitcoin)
so in this example the payee creates an invoice for 50,000 satoshis (or .0005 bitcoin).
$''lncli addinvoice --amt 50000''
2. The payee then sends the invoice to the payer, which decodes the invoice to verify the amount
$''lncli decodepayreq <paste invoice here>''
3. The payer then pays the invoice
$''lncli payinvoice <paste invoice here>''

* That's it! Also note, the decodepayreq step can normally be skipped since when you pay the invoice you are prompted to confirm the amount before it is sent

= Data in invoice =
<pre>
"destination": "03ab75012c0a552ddb0194f43d57d9af2a83a86cc2a96abf0134c6d9349819c8a8",
"payment_hash": "8d54fb2afe6e35f36f3e6055fa062b2f3fd11e67b0d287618471477fde80f3a2",
"num_satoshis": "0",
"timestamp": "1546608429",
"expiry": "3600",
"description": "Lightning Network Tester",
"description_hash": "",
"fallback_addr": "",
"cltv_expiry": "10",
"route_hints": [
]
</pre>

==Payment preimage==
Proof that payment has been received, held by the final recipient, who is the only person who knows this secret. The final recipient releases the preimage in order to release funds. The payment preimage is hashed as the payment hash in the HTLC.

=Example=
<pre>lnbc1pwr3fk2pp5zh36fav42ngkxfzywag42y06e03drpcujg38mq5gzkftdhp3phhsdqqcqzysvq8mgc5782mje6x0hgqd70pc83aa52g8pmpnc0j9x4pa3hrz3csp0ezl477f06ee4qmt4plcmmsftypy727w9zn06h9h6cz4n02t9qcp0c74yt</pre>
BOLT11 has more

Invoice

2019-02-12T01:33:14Z

173.87.33.113:

A request for funds on the Lightning Network, possibly including payment type, payment amount, expiry, and other information. This is how payments are made on the Lightning Network, rather than using Bitcoin-style addresses.

If you want to accept payments (on your site), look at [[Payment providers]]

=Payments process=
{{TODO|Explain how a payment is done}}
# Someone creates an invoice
# Invoice is paid
# Payment is done!
=Payment steps using LND command line=
1. The Payee starts the process by creating an invoice note: The amount to send is always expressed in Satoshis (1 satoshi = .00000001 bitcoin)
$''lncli addinvoice --amt 50000''
so in this example the payee creates an invoice for 50,000 satoshis (or .0005 bitcoin).
2. The payee then sends the invoice to the payer, which decodes the invoice to verify the amount
$''lncli decodepayreq <paste invoice here>''
3. The payer then pays the invoice
$''lncli payinvoice <paste invoice here>''

* That's it! Also note, the decodepayreq step can normally be skipped since when you pay the invoice you are prompted to confirm the amount before it is sent

= Data in invoice =
<pre>
"destination": "03ab75012c0a552ddb0194f43d57d9af2a83a86cc2a96abf0134c6d9349819c8a8",
"payment_hash": "8d54fb2afe6e35f36f3e6055fa062b2f3fd11e67b0d287618471477fde80f3a2",
"num_satoshis": "0",
"timestamp": "1546608429",
"expiry": "3600",
"description": "Lightning Network Tester",
"description_hash": "",
"fallback_addr": "",
"cltv_expiry": "10",
"route_hints": [
]
</pre>

==Payment preimage==
Proof that payment has been received, held by the final recipient, who is the only person who knows this secret. The final recipient releases the preimage in order to release funds. The payment preimage is hashed as the payment hash in the HTLC.

=Example=
<pre>lnbc1pwr3fk2pp5zh36fav42ngkxfzywag42y06e03drpcujg38mq5gzkftdhp3phhsdqqcqzysvq8mgc5782mje6x0hgqd70pc83aa52g8pmpnc0j9x4pa3hrz3csp0ezl477f06ee4qmt4plcmmsftypy727w9zn06h9h6cz4n02t9qcp0c74yt</pre>
BOLT11 has more

Invoice

2019-02-12T01:30:54Z

173.87.33.113:

A request for funds on the Lightning Network, possibly including payment type, payment amount, expiry, and other information. This is how payments are made on the Lightning Network, rather than using Bitcoin-style addresses.

If you want to accept payments (on your site), look at [[Payment providers]]

=Payments process=
{{TODO|Explain how a payment is done}}
# Someone creates an invoice
# Invoice is paid
# Payment is done!
=Payment steps using LND command line=
1. The Payee starts the process by creating an invoice $''lncli addinvoice --amt 50000''
note: The amount to send is always expressed in Satoshis (1 satoshi = .00000001 bitcoin)
so in this example the payee creates an invoice for 50,000 satoshis (or .0005 bitcoin).
2. The payee then sends the invoice to the payer, which decodes the invoice to verify the amount $''lncli decodepayreq <paste invoice here>''
3. The payer then pays the invoice $''lncli payinvoice <paste invoice here>''

That's it! Also note, the decodepayreq step can normally be skipped since when you pay the invoice you are prompted to confirm the amount before it is sent

= Data in invoice =
<pre>
"destination": "03ab75012c0a552ddb0194f43d57d9af2a83a86cc2a96abf0134c6d9349819c8a8",
"payment_hash": "8d54fb2afe6e35f36f3e6055fa062b2f3fd11e67b0d287618471477fde80f3a2",
"num_satoshis": "0",
"timestamp": "1546608429",
"expiry": "3600",
"description": "Lightning Network Tester",
"description_hash": "",
"fallback_addr": "",
"cltv_expiry": "10",
"route_hints": [
]
</pre>

==Payment preimage==
Proof that payment has been received, held by the final recipient, who is the only person who knows this secret. The final recipient releases the preimage in order to release funds. The payment preimage is hashed as the payment hash in the HTLC.

=Example=
<pre>lnbc1pwr3fk2pp5zh36fav42ngkxfzywag42y06e03drpcujg38mq5gzkftdhp3phhsdqqcqzysvq8mgc5782mje6x0hgqd70pc83aa52g8pmpnc0j9x4pa3hrz3csp0ezl477f06ee4qmt4plcmmsftypy727w9zn06h9h6cz4n02t9qcp0c74yt</pre>
BOLT11 has more

Invoice

2019-02-12T01:28:37Z

173.87.33.113: /* Payments process */

A request for funds on the Lightning Network, possibly including payment type, payment amount, expiry, and other information. This is how payments are made on the Lightning Network, rather than using Bitcoin-style addresses.

If you want to accept payments (on your site), look at [[Payment providers]]

=Payments process=
{{TODO|Explain how a payment is done}}
# Someone creates an invoice
# Invoice is paid
# Payment is done!
=Payment steps using LND command line=
# The Payee starts the process by creating an invoice $''lncli addinvoice --amt 50000''
note: The amount to send is always expressed in Satoshis (1 satoshi = .00000001 bitcoin)
so in this example the payee creates an invoice for 50,000 satoshis (or .0005 bitcoin).
# The payee then sends the invoice to the payer, which decodes the invoice to verify the amount $''lncli decodepayreq <paste invoice here>''
# The payer then pays the invoice $''lncli payinvoice <paste invoice here>''
# That's it! Also note, the decodepayreq step can normally be skipped since when you pay the invoice you are prompted to confirm the amount before it is sent

= Data in invoice =
<pre>
"destination": "03ab75012c0a552ddb0194f43d57d9af2a83a86cc2a96abf0134c6d9349819c8a8",
"payment_hash": "8d54fb2afe6e35f36f3e6055fa062b2f3fd11e67b0d287618471477fde80f3a2",
"num_satoshis": "0",
"timestamp": "1546608429",
"expiry": "3600",
"description": "Lightning Network Tester",
"description_hash": "",
"fallback_addr": "",
"cltv_expiry": "10",
"route_hints": [
]
</pre>

==Payment preimage==
Proof that payment has been received, held by the final recipient, who is the only person who knows this secret. The final recipient releases the preimage in order to release funds. The payment preimage is hashed as the payment hash in the HTLC.

=Example=
<pre>lnbc1pwr3fk2pp5zh36fav42ngkxfzywag42y06e03drpcujg38mq5gzkftdhp3phhsdqqcqzysvq8mgc5782mje6x0hgqd70pc83aa52g8pmpnc0j9x4pa3hrz3csp0ezl477f06ee4qmt4plcmmsftypy727w9zn06h9h6cz4n02t9qcp0c74yt</pre>
BOLT11 has more